深圳市雅宝谷科技有限公司(打印机中文站)

深圳市雅宝谷科技有限公司(打印机中文站)

Hotline:13823369693
Contact information
National service hotline:13823369693

联络人: 成鹏

联系电话:13823369693

传真号吗: 0755-27873025

地址:广东省深圳市宝安区73区腾骏工业园B座6楼602室

Hard plug repair of print head

Source:   Release time:2019-05-14   Click on the quantity:5097

1, soaking method

Scope of application: Less obstructed

How it works: Dissolve the ink particles one by one with medium-strength organic solvents. Note that you must use 95% organic solvent alcohol, otherwise it will be counterproductive.

Solution: First find a metal container with a smooth bottom surface. Add a little alcohol with 95% organic solvent to the container. The amount of alcohol is just enough to cover the stainless steel edge of the print head (be careful not to expose the PCB to alcohol). Soaking time generally ranges from 2 hours to 4 days. The advantage is that the cleaning effect is good, and it is not easy to cause physical damage to the print head; the disadvantage is that it takes a long time and it is difficult to solve the urgent needs of the user.

2, pressure cleaning method

Applicable scope: heavy resistance

Essential tools: 95% alcohol, a clean cup, a disposable syringe, and a disposable infusion set.

Working principle: Using the pressure generated by the siphon action of the syringe, the organic solvent, alcohol, is injected into the print head to achieve the function of cleaning the dry ink head.

Solution: Use a plastic pipe or needle part of a disposable infusion set to make the interface between the syringe and the ink supply port of the print head (the binding site must be tight). After the interface is finished, put the head of the print head at a concentration. 95% of the organic solvent alcohol, through the print head to inhale alcohol (note that only inhalation) in the syringe needle, inhaled several times. The advantage is that the cleaning effect is good. Heavily jammed printheads can be cleaned by this method. It is worth noting that when inhaling alcohol, it should be applied evenly and consistently. It will not cause physical damage. It is only necessary to make the interface by hand during the production of the actual situation. Therefore, professional maintenance technicians are required to cooperate. There is a certain amount of hands-on capability for hands-on repairs, and a good tool can ensure long-term use.


Previous article:No PreviousThe next article:How to discern the quality of varnish
Hot labels:Hard plug repair of print head

深圳市雅宝谷科技有限公司(打印机中文站)

Contact Person: Sherry Yuan
Mobile Phone: +86 13410182885
Direct Hotline: 0755-28800001
Faxt: 0755-27873025
Email: sales@abarcn.com
Address: 6 Floor, B Block, Teng Jun Industrial Zone, BaoAn 73 District, Shenzhen City, Guangdong, China

Sweeping attention

Sweeping attention

Copyrights©2017 深圳市雅宝谷科技有限公司(打印机中文站) All Rights Reserved