联络人: 成鹏
联系电话:13823369693
传真号吗: 0755-27873025
地址:广东省深圳市宝安区73区腾骏工业园B座6楼602室
Manually used cleaning nozzle method
Source: Release time:2019-05-14 Click on the quantity:2120
For most people, the home will not be prepared for a professional ultrasonic cleaning instrument to clean the nozzle, and the simple use of software tool cleaning can not meet everyone's cleaning requirements, then prepare a clean wash basin and then Pour some of it in warm water, and soak the printer nozzle in water for an hour.
(If your spray head and ink cartridge are of a one-piece design, you should pay attention to soaking. You only need to immerse the nozzle part in the water, do not put the entire ink cartridge into the water, so control the pouring of warm water when emptied of warm water. Important.) After the soaking is completed, remove the spray head and let the spray head face outwards. Thoroughly dry it by hand. Use centrifugal force to let the spray head throw out the remaining ink, and use a napkin to blot out the ink near the ink cartridge nozzle.
If this method does not work then you need to change the cleaning solution. Naturally, it is better to use a professional ink cleaning solution. You can also use the high concentration of alcohol in the sonicator in the first method to clean it. Another method is to use a disposable syringe filled with alcohol, and then connected to the print head ink port, the head of the print head placed in high concentrations of alcohol, through the print head into the syringe needle into the alcohol, after inhaling several times Clean the printheads with more severe jams.